❓ FAQ – Top 10 Questions (QA Format)

Q1: What is the main purpose of the 3500/32M module?
A1: The 3500/32M outputs relay signals based on configured alarm conditions, enabling machinery shutdown, alarms, or interlock operations.

Q2: Can each relay channel be configured independently?
A2: Yes, all four channels are fully independent and programmable with unique logic and trip conditions.

Q3: Is this module hot-swappable?
A3: No, it’s recommended to power down the rack before installing or removing the module.

Q4: What kind of loads can the relays drive?
A4: The relays can handle up to 5A at 24VDC or 240VAC for resistive loads. Inductive loads require proper suppression.

Q5: How is logic configured for the relay outputs?
A5: Logic is configured using the 3500 configuration software. You can assign AND/OR/VOTE/LATCH functions to each output.

Q6: Is this module safe for hazardous area installations?
A6: Yes, when properly installed, it supports use in Zone 2 and Division 2 hazardous environments with corresponding certifications.

Q7: What is the relay response time?
A7: Response time is very fast, typically in milliseconds, depending on system logic and alarm processing.

Q8: How can I verify if a relay is working?
A8: Check the module’s LED indicators, monitor status via the TDI, and use test functions in the configuration software.

Q9: How long do the relays last?
A9: Under rated conditions, relay life is typically over 100,000 switching cycles.

Q10: Can I use multiple 32M modules in one system?
A10: Yes, systems can include several 32M modules to increase relay output capacity or create redundant output configurations.