❓ Product FAQ – 10 Questions & Answers (Q&A)

Q1: What does the 3500/45 module monitor?
A1: It monitors position-based parameters such as axial shaft position, differential expansion, case expansion, and valve position.

Q2: What types of sensors are supported?
A2: Proximity probes, AC/DC LVDTs, and potentiometer-based position sensors.

Q3: Can all four channels be configured differently?
A3: Yes, each of the four channels can be independently configured for different sensors and functions.

Q4: Is the 3500/45 compatible with older Bently Nevada systems?
A4: It is designed for integration into the 3500 Series rack system but is not backward-compatible with earlier series like the 3300 without significant modification.

Q5: What happens if the measured value exceeds the alarm setpoint?
A5: The module will generate an alert or danger signal depending on the threshold breached, which can activate relays or shutdown protocols.

Q6: How is the module installed?
A6: It is installed in the 3500 rack, occupying one full-height front slot with its corresponding I/O module.

Q7: What are the module’s environmental tolerances?
A7: It operates between –30°C to +65°C and can be stored between –40°C to +85°C with up to 95% non-condensing humidity.

Q8: Does the module provide buffered outputs?
A8: Yes, it offers buffered output for signal routing to external monitoring equipment or analyzers.

Q9: Is this module hot-swappable?
A9: No, power should be removed before inserting or removing modules from the rack.

Q10: Can this module be used in marine or offshore environments?
A10: Yes, provided it is housed in an appropriately rated enclosure that meets environmental and safety standards for such conditions.