FAQ (Frequently Asked Questions)

Q1: How many input channels does the ADV161‑P00 module provide?
A1: 64 discrete digital input channels.

Q2: What is the rated input voltage for each channel?
A2: 24 V DC (sink/source compatible).

Q3: What are the ON and OFF voltage thresholds for inputs?
A3: ON voltage: approx. 20.0 to 26.4 V DC; OFF voltage: 5.0 V or less.

Q4: What is the typical response time of the module?
A4: Response time is 8 ms or less (for status‑type input).

Q5: Is this module suitable for push‑button/edge detection inputs?
A5: Yes — it supports push‑button input mode with minimum ON detection time of ~20 ms and maximum ON/OFF cycle up to approx. 25 Hz.

Q6: What are the module’s physical dimensions and weight?
A6: Approximate size: 220 mm × 155 mm × 35 mm; weight: around 0.30 kg.

Q7: What level of electrical isolation does the ADV161‑P00 offer?
A7: 2 kV AC between input signal and system; 500 V AC between groups of channels (every 16 channels) and system.

Q8: In what environment is this module intended to operate?
A8: Suitable for industrial automation, process control, manufacturing, utilities — environments where many discrete inputs must be captured reliably, often with wiring and space constraints.

Q9: What are the advantages of choosing a 64‑channel module like the ADV161‑P00?
A9: You reduce module count, minimize wiring terminals, save cabinet space, ease installations and expansions, and simplify system architecture with high‐density I/O.

Q10: If I need even higher channel count or special explosion‑proof design, what should I consider?
A10: Look into variants of the ADV161 series with option codes for explosion‑proof, extended environment or higher channel counts, or consider other series designed for those purposes.