Frequently Asked Questions (FAQ)

Q1: What machinery types is this probe suitable for?
A1: It is ideal for turbines, compressors, large motors, pumps, and other high-speed rotating machinery.

Q2: Can I use this probe with older Bently Nevada systems?
A2: Yes, it is backward-compatible with legacy systems like 3300, but optimal performance is with 3300 XL monitors.

Q3: Does it require regular recalibration?
A3: No frequent recalibration is required; factory-calibrated probes remain stable over long periods.

Q4: What is the standard cable length for this model?
A4: This version comes with a 0.5-meter integral cable; custom lengths are available upon request.

Q5: Is the sensor tip replaceable?
A5: The probe is a sealed unit; if the tip is damaged, the probe should be replaced.

Q6: Can it be installed outdoors?
A6: Yes, with IP67 protection, it is suitable for outdoor and harsh industrial environments.

Q7: How is it mounted?
A7: Threaded installation into a tapped hole or probe holder; lock nuts secure it in place.

Q8: Can I use this probe in hazardous areas?
A8: Standard version is not explosion-proof; ATEX/IECEx-certified variants are available.

Q9: What output signal does the probe provide?
A9: It outputs a voltage signal of approximately 200 mV per mm of shaft movement.

Q10: Is it compatible with digital condition monitoring software?
A10: Yes, it integrates seamlessly with Bently Nevada’s System 1 condition monitoring platform.