❓ FAQ – 10 Common Questions

Q1: What power range does the 114M5335-01 support?
A1: It supports low voltage DC input from 20 to 30 VDC.

Q2: Can it be used alone to power the 3500 rack?
A2: Yes, it can serve as the primary DC input, or in redundancy with an AC module.

Q3: Does it support hot-swapping?
A3: No, power modules should be replaced with system power off unless otherwise instructed.

Q4: What is the weight of this module?
A4: Approximately 0.34 kg.

Q5: What are the physical dimensions?
A5: 120.7 mm (H) × 25.4 mm (W) × 114.3 mm (D).

Q6: Where is it installed in the rack?
A6: In the power supply slot of the 3500 rack (left section).

Q7: What happens if DC input fails?
A7: If redundancy is configured, the AC input module (if present) will take over.

Q8: Is it compatible with older 3500 racks?
A8: Yes, as long as the rack supports the 3500/15 configuration.

Q9: Does it emit heat or require cooling?
A9: It has minimal heat generation and typically does not require extra cooling.

Q10: Is it a programmable module?
A10: No, it is a passive power interface module without user programmability.