AQs (Frequently Asked Questions)

Q1: How far can the display module be installed from the rack?
A: Standard VGA cable length is up to 6 meters. With a KVM extender or Display Router Box, the display can be placed up to 10 kilometers away depending on the transmission method.

Q2: Is the 3500/94M module certified for hazardous areas?
A: Yes, certain display configurations come with ATEX and IECEx certifications, but you should verify the specific screen model for compliance.

Q3: What screen sizes are supported?
A: Typically 10-inch and 15-inch VGA touch screens are supported.

Q4: What is the power consumption of the 147663-01 module?
A: The maximum power draw for the full unit (Display + I/O) is about 15.5 W. Specific versions use between 5.6 W and 12 W.

Q5: Can I view data from multiple modules and channels?
A: Yes, the display can show system event lists, alarm status, data from all modules and channels, and custom display layouts.

Q6: Is it suitable for extreme environments?
A: Yes, it operates in -20°C to +65°C and stores between -40°C and +85°C. It handles 95% humidity (non-condensing).

Q7: Can it be installed in various ways?
A: Absolutely. It supports panel cut-out, 19-inch rack mount, surface mount, and standalone installations.

Q8: Are custom displays supported?
A: Yes. You can configure up to nine customized screens using configuration software to show critical data.

Q9: What software or firmware is required?
A: Compatible firmware (typically v4.06 Rev. C or newer) and associated configuration tools from the 3500 ecosystem are needed.

Q10: Can I upgrade from an older display module to the 147663-01?
A: Yes, but ensure your rack has an available slot, your firmware is updated, and you use compatible displays and power connections.