❓ Frequently Asked Questions (QA)

Q1: What exactly does the “SICP” designation mean?
A1: “SICP” implies a capacitive probe or interface detection variant in the FS sensor line. It is tuned for sensing dielectric changes or liquid/solid interfaces using a capacitive sensing principle.

Q2: Can FS‑SICP‑0001 handle both continuous and threshold detection?
A2: Yes. Depending on variant or user configuration, it can provide continuous analog level feedback or switch outputs for threshold alarm or detection.

Q3: How deep should the probe be for typical usage?
A3: The standard probe length is 100 mm, but variants or custom options may allow longer or shorter probes to match tank depths or application needs.

Q4: Does it require routine recalibration?
A4: Under stable environments, drift is minimal (<0.1 % FS/year). Occasional verification is recommended, especially when fluid properties or temperature shift.

Q5: What fluids or environments might damage it?
A5: Strong acids, oxidizers, solvents incompatible with PEEK, PTFE or other wetted materials may degrade sensor integrity or accuracy.

Q6: Is it tolerant of vibration or mechanical stress?
A6: Yes, the solid construction and capacitive measurement scheme provide good resilience against vibration and mechanical perturbation.

Q7: What is the response speed?
A7: Typical response time is ≤ 100 ms, allowing reasonably fast detection in dynamic systems.

Q8: Can this model detect through nonmetallic barriers?
A8: Under favorable dielectric conditions, it can sense through thin nonmetallic walls (glass, plastic) though sensitivity and linearity may vary.

Q9: How is it interfaced with a PLC or control system?
A9: Use the proper supply voltage (12–30 V DC). The analog output (4–20 mA or 0–5 V) goes to an analog input. For switch output versions, wire it as a digital input with appropriate pull resistors or buffer circuits.

Q10: What mounting options are available?
A10: Standard configurations use ½″ NPT or G½″ threading. Adaptors or flanges may also be used to fit custom tank or vessel mounts.