6. FAQ (10 Q&A)

Q1: What is the weight of the IS200ERBPG1A board?
A1: Depending on version, approximately 1.36 kg (3 lbs) for full backplane module; smaller variant versions around 0.8 kg.

Q2: What are its dimensions?
A2: One typical listing gives 263 mm × 58 mm × 28 mm; some smaller variants given ~100 mm × 50 mm × 25 mm.

Q3: What power voltage does it require?
A3: 24 V DC is the standard input for power rails.

Q4: Does it support redundant operation?
A4: Yes, it is designed to function in either simplex or redundant configurations.

Q5: What connectors are provided?
A5: Includes power positive (TB1) and power negative (TB2) terminals; keypad connector (J4); multiple plug connectors (three 3‑position, one 12‑position).

Q6: What environment can it operate in (temperature)?
A6: Many versions support approximately −40 °C to +85 °C; some may have lower maximums depending on version.

Q7: What modules does this backplane interface with?
A7: It interfaces with EX2100 / Mark VI modules such as DSPX, EPSM, feedback boards, terminal boards.

Q8: Is diagnostic feedback included?
A8: Yes, in many versions it includes status indicators (power, connector presence), possibly LED indicators to show operational/ fault states.

Q9: What are mechanical requirements for mounting?
A9: Must be installed in correct rack position; connectors must align; sufficient clearance behind/over board for plug connectors; good contact for power terminals (TB1, TB2).

Q10: Is this board still actively manufactured or is it obsolete?
A10: It is less common, sometimes listed as surplus or obsolete; but still available via some suppliers for maintenance or retrofit.